Pulsafeeder DM7J1FH Mechanically Actuated Diaphragm Metering Pump – Green Line Series, 824.2 GPH – 73 PSI
$17,330.00 Original price was: $17,330.00.$14,557.20Current price is: $14,557.20.
Model: DM7J1FH
Flow Rate: Up to 824.2 GPH
Maximum Pressure: 73 psi
Construction Material: PVDF (Polyvinylidene Fluoride)
Motor Power: 0.54 horsepower
Voltage: 115/230V, 60Hz
Drive Type: Mechanically actuated diaphragm
Turn Down Ratio: Typically 10:1
Standard Features & Benefits
- Durable Multi-Layer PTFE-Faced Diaphragm
The flat, mechanically actuated diaphragm ensures long service life and exceptional chemical resistance. Multiple sealing beads on the diaphragm minimize the risk of leakage. - Advanced Diaphragm Sealing System
A secure, double-seal configuration includes a secondary O-ring and a retention plate, providing hydrostatic protection and eliminating chemical spray. This system maintains proper torque over time and resists loosening. - Double-Barrier Check Valve Assembly
Provides added leak protection (except in 316L stainless steel configurations) for safer and more secure operation. - Spherically Balanced Flow Check Valves
These valves reduce turbulence, improve solids handling, and provide self-flushing action to help prevent cavitation and maintain flow consistency. - Soft-Seated O-Ring Valve Design
Enhances priming ability, reduces operating noise, and improves performance with slurries or solids (not included in 316L configurations). - Compact, Sealed Gearbox
The lightweight, fully enclosed gearbox saves space and prevents contamination. Oversized shielded bearings and a sealed upper worm bearing increase durability, reduce noise, and improve motor and gear longevity. - Auto-Locking Stroke Adjustment
The built-in auto-locking mechanism prevents unintended movement of the stroke setting. Once adjusted, it stays firmly in place—no secondary locking device required. - Motor Flange Drain Path
Directs fluid away from the drive shaft seal, eliminating pooling and protecting the motor connection. - Non-Metallic Motor Coupling
Prevents seizing or welding between the worm shaft and motor shaft, making motor maintenance and replacement easier. - Stable Mounting Design
Flat, solid feet provide secure pump support and prevent tipping before installation.
Optional Features
- Leak Detection System
Protect your equipment and process with an optional double-diaphragm configuration featuring a pressure gauge and switch to monitor diaphragm integrity. This setup offers superior protection in the event of diaphragm failure. - Variable Frequency Drive (VFD)
Expand operational flexibility with a VFD and compatible motor, allowing remote control and fine-tuned performance across a wider range of conditions.
Suction Lift: 10 ft (3m)
Viscosity: Up to 1,000 cps
Turndown: 10:1
Modular Connections: Threaded, Flanged
Connections: Standard FNPT and ANSI Flanged Connections
Accuracy: +/- 2% of Set Point
Wet End Materials: PVDF with Viton, PTFE O-rings; 316L with PTFE O-rings
Diaphragms: Composite PTFE, solid PTFE (DM7 only). Double sided PTFE coated composite diaphragms maximize chemical resistance and diaphragm lubrication
Check Valves: Ceramic or Stainless Steel
Housing: Epoxy painted aluminum
Lubrication: Oil bath for normal or explosion proof areas – lubricates all internal moving parts to extend pump life with an easy and accessible oil fill location
Hardware: Stainless Steel for added chemical resistance
Four Bolt Tiebar: 316L models only
Process Temperature: From 32 – 113°F (0-45°C)
Ambient Temperature Range: From 32-113°F (0-45°C)
Accessories
- KOP Kits
- PULSALube
- Heavy Duty Adaptor
- Pulsation Dampeners
- Y Strainers
- Pressure Relief Valves
You must be logged in to post a review.

Customer Reviews / Ratings
There are no reviews yet.