Pulsafeeder DM6D1FH Mechanically Actuated Diaphragm Metering Pump – Green Line Series, 174.4 GPH – 73 PSI

Original price was: $5,766.00.Current price is: $4,890.00.

 

Model: DM6D1FH
Flow Rate: Up to 174.4 GPH
Maximum Pressure: 73 psi
Construction Material: PVDF (Polyvinylidene Fluoride)
Motor Power: 0.54 horsepower
Voltage: 115/230V, 60Hz
Drive Type: Mechanically actuated diaphragm
Turn Down Ratio: Typically 10:1

Standard Features & Benefits

  • Durable Multi-Layer PTFE-Faced Diaphragm
    The flat, mechanically actuated diaphragm ensures long service life and exceptional chemical resistance. Multiple sealing beads on the diaphragm minimize the risk of leakage.
  • Advanced Diaphragm Sealing System
    A secure, double-seal configuration includes a secondary O-ring and a retention plate, providing hydrostatic protection and eliminating chemical spray. This system maintains proper torque over time and resists loosening.
  • Double-Barrier Check Valve Assembly
    Provides added leak protection (except in 316L stainless steel configurations) for safer and more secure operation.
  • Spherically Balanced Flow Check Valves
    These valves reduce turbulence, improve solids handling, and provide self-flushing action to help prevent cavitation and maintain flow consistency.
  • Soft-Seated O-Ring Valve Design
    Enhances priming ability, reduces operating noise, and improves performance with slurries or solids (not included in 316L configurations).
  • Compact, Sealed Gearbox
    The lightweight, fully enclosed gearbox saves space and prevents contamination. Oversized shielded bearings and a sealed upper worm bearing increase durability, reduce noise, and improve motor and gear longevity.
  • Auto-Locking Stroke Adjustment
    The built-in auto-locking mechanism prevents unintended movement of the stroke setting. Once adjusted, it stays firmly in place—no secondary locking device required.
  • Motor Flange Drain Path
    Directs fluid away from the drive shaft seal, eliminating pooling and protecting the motor connection.
  • Non-Metallic Motor Coupling
    Prevents seizing or welding between the worm shaft and motor shaft, making motor maintenance and replacement easier.
  • Stable Mounting Design
    Flat, solid feet provide secure pump support and prevent tipping before installation.

Optional Features

  • Leak Detection System
    Protect your equipment and process with an optional double-diaphragm configuration featuring a pressure gauge and switch to monitor diaphragm integrity. This setup offers superior protection in the event of diaphragm failure.
  • Variable Frequency Drive (VFD)
    Expand operational flexibility with a VFD and compatible motor, allowing remote control and fine-tuned performance across a wider range of conditions.

 

Stroke Adjustment: 0-100% stroke range in one complete revolution, resolution 1%, Auto locking stroke position, drift free – maintaining proper flow

Suction Lift: 10 ft (3m)
Viscosity: Up to 1,000 cps
Turndown: 10:1
Modular Connections: 
Threaded, Flanged
Connections: Standard FNPT and ANSI Flanged Connections
Accuracy: +/- 2% of Set Point
Wet End Materials: PVDF with Viton, PTFE O-rings; 316L with PTFE O-rings
Diaphragms: Composite PTFE, solid PTFE (DM7 only). Double sided PTFE coated composite diaphragms maximize chemical resistance and diaphragm lubrication
Check Valves: Ceramic or Stainless Steel
Housing: Epoxy painted aluminum
Lubrication: Oil bath for normal or explosion proof areas – lubricates all internal moving parts to extend pump life with an easy and accessible oil fill location
Hardware: Stainless Steel for added chemical resistance
Four Bolt Tiebar: 316L models only
Process Temperature: From 32 – 113°F (0-45°C)
Ambient Temperature Range: From 32-113°F (0-45°C)

Accessories

  • KOP Kits
  • PULSALube
  • Heavy Duty Adaptor
  • Pulsation Dampeners
  • Y Strainers
  • Pressure Relief Valves

Products Related to this Item

Skip to content