Harmsco HC/90-100 | 100 Micron Pleated Polyester Filter Cartridge for HUR-90-HP Housing

$159.26

  • Model: HC/90-100
  • Type: Premium Hurricane® Pleated Polyester Filter Cartridge
  • Micron Rating: 100 Micron (Nominal)
  • Dimensions:
    • Length: 19.5 inches
    • Outer Diameter: 7.75 inches
    • Inner Diameter: 2.1 inches (Double Open End, DOE)
  • Filter Media: Pleated Polyester-Plus™
  • End Caps: Thermally bonded PVC
  • Center Tube: PVC
  • Temperature Rating: Up to 140°F (60°C)
  • Pressure Rating: 150 psi
  • Recommended Flow Rate: Approximately 70 GPM
  • Maximum Flow Rate: Up to 100 GPM
  • Surface Area: Approximately 90 ft²
  • Compatibility: Designed for use with Harmsco HUR-90-HP filter housing
Harmsco HC/90-100, 100 Micron Premium Hurricane Polyester Cartridge
– Fewer cartridges mean fewer replacements and cheaper maintenance costs.
– Pleated Polyester-Plus™ filter media improves flow rates and reduces initial pressure drop. – Pleated surface area increases loading capacity, resulting in extended filter life and enhanced particle removal.
– The end cap, center tube, and media are thermally fused as a single integral component for increased strength.
– High Flow capability
– Lower overall operating cost
– Reduced waste disposal
– Longer filter runs for fewer change-outs
– Increased contaminant removal
– Operator friendly
– NSF Certified to ANSI-NSF 61
Applications
– Reverse Osmosis Pre-Filtration                                        – Cooling Tower Filtration
– Municipal Drinking Water Filtration                                – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration          – Food & Beverage Filtration
– Desalination Pre-Filtration                                                – Marine/Aquatic Filtration
– Industrial Water Filtration                                                 – Industrial Coolant Filtration

Cleanable/Reusable in most filtration applications and micron ratings

Micron Rating 100 Microns
Media (sq ft) 90
Rec. Flow Rate (GPM)
70
Max Flow Rate (GPM)*
100
Max Flow Rate (LPM)*
378
Max Flow Rate (M3/Hr)*
24
Filter Dimension 7-3/4″ OD x 19-1/2″ H
Filter Media Nominal pleated Polyester-Plus™
End Caps
Pliable PVC w/ sealing surface built in
Center Tubes
ABS or PVC
Temperature
140°F  (60°C)**

* Harmsco Recommends operation at 70% of maximum flow rate for optimum performance
** Temperature limits vary and depend on pressure and time under load

Skip to content