Advantage Controls AWM-150 – 1-1/2″ Seametrics Water Meter with Contacting Head
$498.40 Original price was: $498.40.$435.00Current price is: $435.00.
Harmsco HC/40-100 | 100 Micron Pleated Polyester Filter Cartridge for HUR-40HP Housing
$179.05 Original price was: $179.05.$130.00Current price is: $130.00.
Harmsco HC/40-20 | 20 Micron Pleated Polyester Filter Cartridge for HUR-40HP Housing
$179.05 Original price was: $179.05.$130.00Current price is: $130.00.
- Model: HC/40-20
- Type: Premium Hurricane® Pleated Polyester Filter Cartridge
- Micron Rating: 20 Micron (Nominal)
- Dimensions:
-
- Length: 9-5/8 inches
- Outer Diameter: 7-3/4 inches
- Inner Diameter: 2-1/8 inches (Double Open End, DOE)
- Filter Media: Pleated Polyester-Plus™
- End Caps: Pliable PVC with built-in sealing surface
- Center Tube: ABS or PVC
- Temperature Rating: Up to 140°F (60°C)
- Pressure Rating: 150 psi
- Recommended Flow Rate: 35 GPM
- Maximum Flow Rate: 50 GPM
- Surface Area: Approximately 40 ft²
- Compatibility: Designed for use with Harmsco HUR-40HP filter housing
Item No:
HC/40-20 Harmsco Hurricane Filter
Category: Filter Cartridge
Description
Harmsco HC/40-20, 20 Micron Premium Hurricane Polyester Cartridge
– Fewer cartridges mean fewer replacements and cheaper maintenance costs.
– Pleated Polyester-Plus™ filter media improves flow rates and reduces initial pressure drop. – Pleated surface area increases loading capacity, resulting in extended filter life and enhanced particle removal.
– The end cap, center tube, and media are thermally fused as a single integral component for increased strength.
– Pleated Polyester-Plus™ filter media improves flow rates and reduces initial pressure drop. – Pleated surface area increases loading capacity, resulting in extended filter life and enhanced particle removal.
– The end cap, center tube, and media are thermally fused as a single integral component for increased strength.
– High Flow capability
– Lower overall operating cost
– Reduced waste disposal
– Longer filter runs for fewer change-outs
– Increased contaminant removal
– Operator friendly
– NSF Certified to ANSI-NSF 61
Applications
– Reverse Osmosis Pre-Filtration – Cooling Tower Filtration
– Municipal Drinking Water Filtration – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration – Food & Beverage Filtration
– Desalination Pre-Filtration – Marine/Aquatic Filtration
– Industrial Water Filtration – Industrial Coolant Filtration
– Reverse Osmosis Pre-Filtration – Cooling Tower Filtration
– Municipal Drinking Water Filtration – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration – Food & Beverage Filtration
– Desalination Pre-Filtration – Marine/Aquatic Filtration
– Industrial Water Filtration – Industrial Coolant Filtration
Specifications
Cleanable/Reusable in most filtration applications and micron ratings
| Micron Rating | 20 Microns |
| Media (sq ft) | 40 |
| Rec. Flow Rate (GPM) |
35 |
| Max Flow Rate (GPM)* |
50 |
| Max Flow Rate (LPM)* |
189 |
| Max Flow Rate (M3/Hr)* |
12 |
| Filter Dimension | 7-3/4″ OD x 9-5/8″ H |
| Filter Media | Nominal pleated Polyester-Plus™ |
| End Caps |
Pliable PVC w/ sealing surface built in |
| Center Tubes |
ABS or PVC |
| Temperature |
140°F (60°C)** |
* Harmsco Recommends operation at 70% of maximum flow rate for optimum performance
** Temperature limits vary and depend on pressure and time under load
Datasheet
Replacement Parts
No replacement parts listed for this item yet.
Reviews (0)
Be the first to review “Harmsco HC/40-20 | 20 Micron Pleated Polyester Filter Cartridge for HUR-40HP Housing” Cancel reply
You must be logged in to post a review.


Customer Reviews / Ratings
There are no reviews yet.