Harmsco 801-20 Cartridge Filter 20 Micron – 24 Pack
$228.00
- Model: 801-20
- Type: Pleated Sediment Filter Cartridge
- Micron Rating: 20 Micron (Nominal)
- Material: Polyester-Plus™ Filter Media
- Dimensions: 2.75″ Diameter x 9.75″ Length
- Surface Area: Approximately 6 sq. ft. per cartridge
- Flow Rate: Recommended 4–6 GPM per cartridge
- Temperature Rating: Up to 140°F (60°C)
- pH Range: 3 to 11
- Certifications: NSF/ANSI Standard 61; FDA-approved materials
Harmsco 801-20, 20 Micron Premium Polyester Cartridge
Features:
– Features include a pleated shape for increased surface area, FDA-approved materials, NSF-61 certification, and engineered media for optimal performance.
– Cleanable and reusable for most applications and micron sizes.
– Thermally bonded end caps for improved sealing.
– End caps are color-coded for simple micron identification.
– Full product line – widest range of micron ratings
– High temperature cartridges are available (not NSF 61 listed).
– Lower overall operating cost
– High flow capability
– Longer filter runs for fewer change-outs
– Increased contaminant removal
– Lower intial pressure drops
– Reduced maintenance down time and cost
– NSF Certified to ANSI-NSF 61
Applications
– Reverse Osmosis Pre-Filtration – Cooling Tower Filtration
– Municipal Drinking Water Filtration – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration – Food & Beverage Filtration
– Desalination Pre-Filtration – Marine/Aquatic Filtration
– Industrial Water Filtration – Industrial Coolant Filtration
Specifications
Harmsco HIF filter housings use 9-3/4″, 19-1/2″ and 29-1/4″ length cartridges only.
| Micron Rating | 20 Microns |
| Media (sq ft) | 6 |
| Rec. Flow Rate (GPM) |
6 |
| Flow Rate |
4-6 GPM per 9-3/4″ length |
| Filter Dimension | 2-3/4″ OD x 9-3/4″ H (1-1/16″ ID) |
| pH |
3-11 |
| Filter Dimension | 2-3/4″ OD x 9-3/4″ H |
| Filter Media | Polyester-Plus™ |
| End Caps |
Plastisol (pliable PVC), except urethane on HT Series |
| Center Tubes |
Molded ABS or rigid PVC |
| Temperature |
140°F (Standard), 200°F (High temp. cartridges)** |
* Harmsco Recommends operation at 70% of maximum flow rate for optimum performance
** Temperature limits vary and depend on pressure and time under load
You must be logged in to post a review.
Related products
Harmsco HC/40-20 | 20 Micron Pleated Polyester Filter Cartridge for HUR-40HP Housing
Customer Reviews / Ratings
There are no reviews yet.