Harmsco HUR 90 HP – Hurricane Filter Housing
$2,406.52
- Model: HUR 90 HP
- Type: Single-Cartridge Up-Flow Filter Housing
- Flow Rate
- Recommended: Up to 70 GPM
- Maximum: Up to 100 GPM
-
Service Height: 51″
-
Housing Material: Electropolished 304 Stainless Steel
- Standpipe Material: CPVC (standard); optional stainless steel for high-temperature applications
- Pressure Rating: 150 PSI (10 bar)
- Temperature Rating: Up to 140°F (60°C); up to 250°F (121°C) with optional stainless steel standpipe and high-temperature cartridge
- Inlet/Outlet Size: 2″ NPT
- Drain Size: 1″ NPT
- Dimensions:
- Height: 29-7/8″
- Diameter: 13″
- Floor Space Required: 15″ x 15″
- Weight: Approximately 52 lbs
- Gasket Material: EPDM (Buna-N and Viton options available)
- Certifications: NSF/ANSI Standard 61 (material requirements)
- Filtration Technology: Patented up-flow cyclone design for enhanced dirt-holding capacity
Features
– Combination cyclone separator and cartridge filter in a single compact design
– Patened up-flow design with tangential entry – prevents air entrapment
– Rotational flow “flutters” media pleats – improving loading performance
– Electropolished 304 Stainless stell housing
– Fail-Safe lid closure, rated for 150 psi
– Three sizes for greater surface area
– CPVC standpipe (standard) – stainless steel optional
– Extensive choice of cartridge micron ratings and media, including carbon block
– NSF 61 listed
– Maunfactured in the USA
Applications
– Commercial/Residential Drinking Water – Industrial Waste Water Treatment
– Cooling Tower Filtration – Reverse Osmosis Pre-Filtration
– Desalination Pre-Filtration (316 & Coated Options) – Small community compliance (LT2)
– Surface Water Treatment Rule (SWTR) LT2 – Well Water
– Process Water – Ground water remediation
– Whole House Filtration – Ground water under direct influence (GUDI)
‘- Holds (1) Hurricane Cartridge
| Filter Model | HUR 90 HP |
| Height | 29-7/8″ |
| Width |
14-3/8″ |
| Diameter |
13″ |
| Inlet Height |
17-3/4″ |
| Outlet Height |
3-7/16″ |
| Pipe Size NPT |
2″ |
| Drain Size |
1″ |
| Floor Space |
15″ x 15″ |
| Service Height |
51″ |
| Shipping Weight |
52 lbs. |
| Recommended Flow Rate |
Up To 70 GPM |
| Max. Flow Rate |
Up To 100 GPM |
– Electropolished 304 stainless steel finish
– Standpipe – CPVC
– Wing nuts – brass
– Rim gaskets – EPDM (Buna-N, Viton available)
– BSTP optional
– Pressure – up to 150 psi (10 bar) max
– Temperature – up to 140°F (60° C) max. Up to 250°F (121°C) with optional stainless steel standpipe and high temperature cartridges installed.
You must be logged in to post a review.
Related products
Harmsco HUR 40 HP – 50 GPM Stainless Steel Hurricane Filter Housing | Up-Flow Cyclonic Separator
Customer Reviews / Ratings
There are no reviews yet.