Contact us for consulting:

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Lutz Pump Tubes 0103-405, MMS-PP 41 L HC 39″

Lutz Pump Tubes 0103-405

$868.70

PULSAtron Series A Plus Metering Pump
58 GPD @ 100 PSI, 115 VAC

Dual Manual Control
Stroke frequency and stroke length are manually adjustable. 100:1 max turndown.


General Description
Pulsafeeder PULSAtron Series A Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series A Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series A Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat. Agency Approved and water resistant for demanding outdoor and indoor applications.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.

Pulsafeeder PULSAtron Series A Plus Chemical Metering Pump – Key Features

  • Manual Control by on-line adjustable stroke rate and stroke length.
  • Highly Reliable timing circuit.
  • Circuit Protection against voltage and current upsets.
  • Solenoid Protection by thermal overload with auto-reset.
  • Water Resistant, for outdoor and indoor applications.
  • Internally Dampened To Reduce Noise.
  • Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
  • Few Moving Parts and Wall Mountable.
  • Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
  • Reliable metering performance.
  • Rated “hot” for continuous duty.
  • Leak-free, sealless, liquid end.

Lutz Drum and Container Pumps for non-flammable liquids
Drum pump MMS/MSL-PP 41 for acids and alkalis
Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Acids, alkalis, galvanic fluids, phosphates, nitrates, sulphates, chlorates, etc.

Drum pump MMS/MSL-PVDF 41 for concentrated liquid
Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping clean and dirty, thin-bodied and slightly viscous, aggressive and non-aggressive liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Highly concentrated acids and alkalis, bromic acid, sulphuric acid, nitric acid, dimethyle phthalate, potassium bromate, hydrofluoric acid, etc.

Drum pump MMS/MSL-ALU 41 for neutral liquids
Applications:The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping non-aggressive, clean, thin-bodied and slightly viscous liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples:Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.

Drum pump MMS/MSL-SS 41 for aggressive liquids
Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping non-aggressive, clean, thin-bodied and slightly viscous liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.

Drum pump SL-HC 42 for extremely corrosive liquids
Applications: The robust sealless pump tube is suitable for pumping nearly all kinds of liquids, whether extremely aggressive, clean or dirty, thin-bodied or slightly viscous non-flammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.

Lutz Drum and Container Pumps for hazardous liquids
Drum pump MMS/MSL-SS 41 Ex for flammable liquids
Applications: The robust Lutz pump tube with mechanical seal or sealless is suitable for pumping allmost all types of thin-bodied, slightly viscous, aggressive and flammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Gasoline, solvents, alcohols, amines, benzol, toluene, xylene, paints and lacquers, etc.

Drum pump SL-HC 42 Ex for flammable liquids
Applications: The robust sealless pump tube is suitable for pumping nearly all kinds of liquids, whether extremely aggressive, clean or dirty, thin-bodied or slightly viscous flammable liquids out of drums and small or large containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Buthylchloride, chlorosulfonic acid, gasoline, solvents, alcohols, amines, benzol, toluene, xylene, etc.

Lutz Drum and Container Pumps for complete drum drainage
Drum pump RE-PP for complete drum drainage
Applications: The pump tube RE-PP is suitable for applications, in which highly toxic, expensive and sensitive non-flammable liquids need to be drained almost completely from drums and containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Acids, alkalis, galvanic solutions, hydrazine, phosphates, sulfates, nitrates, etc.

Drum pump RE-SS for complete drum drainage
Applications: The pump tube RE-SS is suitable for applications, in which highly toxic, expensive and sensitive non-flammable liquids need to be drained almost completely from drums and containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Alaun, borax, Diesel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, etc.

Drum pump RE-SS Ex for complete drum drainage
Applications: The pump tube RE-SS Ex is suitable for applications, in which highly toxic, expensive and sensitive inflammable liquids need to be drained almost completely from drums and containers. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Gasoline, solvents, alcohols, amines, benzene, toluene, xylene, perfume oils, paints and lacquers, etc.

Lutz Drum and Container Pumps for mixing and pumping
Drum pump MP-PP for mixing and pumping
Applications: The mixing pump tube MP-PP combines a mixer and a pump in one unit. It´s suitable for mixing and transfering of emulsions, dispersions and suspensions which are tending to separate. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Emulsions, suspensions, dispersions, paints and lacquers.

Drum pump MP-SS for mixing and pumping
Applications: The mixing pump tube MP-SS combines a mixer and a pump in one unit. It´s suitable for mixing and transfering of emulsions, dispersions and suspensions which are tending to separate. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Emulsions, suspensions, dispersions, paints and lacquers.

Drum pump MP-SS Ex for mixing and pumping
Applications: The mixing pump tube MP-SS Ex combines a mixer and a pump in one unit. It´s suitable for mixing and transfering of emulsions, dispersions and suspensions which are tending to separate. The pump tube is non-lubricated, thus preventing contamination of the liquids pumped.
Liquid examples: Emulsions, suspensions, dispersions, paints and lacquers.

Lutz Drum and Container pumps for viscous liquids
Progressive cavity pump B70V-SR 12.1 and 25.1
Applications: The B70V-SR is suitable for aqueous to highly-viscous substances with or without fibrous or solid matters. For applications in the food, pharmaceutical and cosmetics industry, no special shaft joint is needed. The pump is either operated with Lutz universal motors 110-120V AC or with compressed air motors.
Liquid examples: Chemical industry: acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc. Cosmetics industry: creams, soaps, toothpaste, shampoos and raw materials for soaps. Confectionery industry: honey, syrups and preserves. Paint and lacquer factories: paints, lacquers and pastes. Food industry: milk, whey, cheese, spread and ketchup. Mineral oil industry: high-viscosity oils and fluid greases.

Progressive cavity pump B70V-SR 50.1
Applications: The B70V-SR is suitable for aqueous to highly-viscous substances with or without fibrous or solid matters. For applications in the food, pharmaceutical and cosmetics industry, no special shaft joint is needed. The pump is either operated with Lutz universal motors 110-120V AC or with compressed air motors.
Liquid examples: Chemical industry: acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc. Cosmetics industry: creams, soaps, toothpaste, shampoos and raw materials for soaps. Confectionery industry: honey, syrups and preserves. Paint and lacquer factories: paints, lacquers and pastes. Food industry: milk, whey, cheese, spread and ketchup. Mineral oil industry: high-viscosity oils and fluid greases.

Progressive cavity pump B70V-D/DA 12.1 and 25.1
Applications: The B70V-D/DA is a powerful eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. For applications in the food, pharmaceutical and cosmetics industry, no special shaft joint is needed. The pump is either driven by 3-phase motors or compressed air motors.
Liquid examples: Chemical industry: acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc. Cosmetics industry: creams, soaps, toothpaste, shampoos and raw materials for soaps. Confectionery industry: honey, syrups and preserves. Paint and lacquer factories: paints, lacquers and pastes Food industry: milk, whey, cheese, spread and ketchup. Mineral oil industry: high-viscosity oils and fluid grease

Progressive cavity pump B70V-D/DA 25.2 and 50.1
Applications: The B70V-D/DA is a powerful eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. For applications in the food, pharmaceutical and cosmetics industry, no special shaft joint is needed. The pump is either driven by 3-phase motors or compressed air motors.
Liquid examples: Chemical industry: acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc. Cosmetics industry: creams, soaps, toothpaste, shampoos and raw materials for soaps. Confectionery industry: honey, syrups and preserves. Paint and lacquer factories: paints, lacquers and pastes. Food industry: milk, whey, cheese, spread and ketchup. Mineral oil industry: high-viscosity oils and fluid greases

Progressive cavity pump B70V-D 75.1
Driven by three-phase motors or compressed air motors.The B70V-D 75.1 is a high capacity eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. The pump is either driven by 3-phase motors or compressed air motors.
Liquid examples: Chemical industry: acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc. Cosmetics industry: creams, soaps, toothpaste, shampoos and raw materials for soaps. Confectionery industry: honey, syrups and preserves. Paint and lacquer factories: paints, lacquers and pastes. Food industry: milk, whey, cheese, spread and ketchup. Mineral oil industry: high-viscosity oils and fluid greases.

Progressive cavity pump B70V 120.1
Applications:The B70V 120.1 is a powerful eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. Driven by three-phase motors (with or without integrated frequency converter).
Liquid examples: Chemical industry: acids, lyes, sludge, viscous pastes, dispersions, adhesives, etc. Cosmetics industry: creams, soaps, toothpaste, shampoos and raw materials for soaps. Confectionery industry: honey, syrups and preserves. Paint and lacquer factories: paints, lacquers and pastes. Food industry: milk, whey, cheese, spread and ketchup. Mineral oil industry: high-viscosity oils and fluid greases.

Lutz Drum and Container Pumps for Hygienic Processes
Progressive cavity pump B70V-H-SR Sanitary 12.1 and 25.1
The B70V-H-SR Sanitary is suitable for sheer-sensitive and viscous substances with or without fibrous or solid matters. The pump is operated with Lutz universal motors 110-120 V AC or MD-2 air motor. For liquid foodstuffs, pharmaceutical agents and cosmetic products

Progressive cavity pump B70V-H-SR Sanitary 50.1
The B70V-H-SR Sanitary is suitable for sheer-sensitive and viscous substances with or without fibrous or solid matters. The pump is operated with Lutz universal motors 110-120 V AC or MD-2 air motor. For liquid foodstuffs, pharmaceutical agents and cosmetic products