Back to products
Pulsafeeder J61191-LF Corporation Stop - 1- Chemical Injection Assembly
Original price was: $552.90.$428.50Current price is: $428.50.
HM Digital CIC-152 Dual Control Dosing/Injection TDS/EC Controller
$366.45
-
Function: Dual-control TDS monitoring and dosing controller
-
Set Points: Two adjustable TDS set points for customized high/low range activation
-
Control Outputs: Dual relay outputs for controlling pumps, valves, or alarms
-
Display: Easy-to-read digital LCD for real-time TDS readings (ppm or ?S)
-
Input: Compatible with HM Digital TDS sensors/probes
-
Power Supply: Standard AC input (110V?220V, depending on model)
-
Mounting: Wall or panel mountable
-
Durability: Rugged construction for long-term use in demanding environments
Description
The CIC controllers can monitor and control dosing and/or injection systems. This unit will control 2 separate systems.
Features:
-
- Monitors and controls dosing or injection systems
- Large, bright tri-color L.E.D. display
- Two adjustable set points keep TDS levels within a range (maximum and minimum TDS/EC levels)
- Minimum and maximum control points will activate relay controls via switching dry contacts
- The CIC-152 can control two different devices (e.g., a pump and a valve)
- Two alarms (maximum and minimum levels) can be set independently of the control points
- Digital calibration
- On-screen temperature display
- On-screen range & control indicator lights (green, yellow, or red)
- Includes one sensor probe
- Available with the 442TM conversion factor (model CIC-152-4)
Specifications
| TDS Range | 0 – 8500 ppm (CIC-152-4) |
| EC Range | 0 – 9999 ?S |
| Temperature Range | 1-80?C; 33-176?F |
| Accuracy | ?2% (of the reading) |
| Resolution | 0.1 ppm (0-999); 1 ppm (1000-9999) |
| ATC | Yes (1 – 80 degrees Celsius) |
| Calibration | Digital (by push button) |
| Factory Calibration | 1413 ?S |
| Conversion Factor | CIC-152-4: 442 (0.4-0.7) |
| Set Points: Adjustable by push buttons. Control Point 2 | Maximum TDS Limit. Control Point 1: Lower TDS Level. |
| Relay Control | The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/?S level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1). |
| The contacts are switched back to the normal position once the TDS returns to the acceptable range | |
| Relay Voltage | 5V (attached devices must have their own power supply) |
| Alarm | Two independent alarms (set by the user) |
| Display | Bright 5/8″ L.E.D. display |
| Probe | 1/2″ bushing (NPT), 3 meters (9.8 ft) shielded cable (model SP-1-PSC) |
| Power Source | AC 110V / AC 220V |
| Dimensions | 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in.) |
| Monitor Weight | 241 g (8.5 oz) |
| Total (Shipping) Weight | 610 g (1 lb 5.5 oz) |
Datasheet
Reviews (0)
You must be logged in to post a review.
Replacement Parts
Related products
Pulsafeeder MVECPOXPF-XXX-XXX Microprocessor Based Conductivity, pH & ORP Controller
Original price was: $6,072.00.$4,988.20Current price is: $4,988.20.
SKU:
MVECPOXPF-XXX-XXX
MVECOXXPF-XXX-XXX Microprocessor Based Conductivity & ORP Controller
Original price was: $4,124.00.$3,387.90Current price is: $3,387.90.
SKU:
MVECOXXPF-XXX-XXX
Pulsafeeder MVECPXXPF-XXX-XXX Microprocessor Based Conductivity & pH Controller
Original price was: $4,124.00.$3,387.90Current price is: $3,387.90.
SKU:
MVECPXXPF-XXX-XXX
Walchem WPHPW100PNJ ORP Controller with Flow Switch Assembly Mounted on Panel
$1,569.95
SKU:
WPHPW100PNJ
Customer Reviews / Ratings
There are no reviews yet.