RC-200: It is a special formulation that’s applied without the need to scrub, eliminating existing iron stains without
harming painted surfaces. RC-200 is very economical, easy to handle and apply.
We strongly recommend a test on an inconspicuous area BEFORE completing the full application and rinse with water thoroughly after stains have dissipated.
(allow test spot to dry before proceeding). RC-200 can be diluted. We suggest starting with a one-to-one
ratio with water.
RC-200 IS SOLD BY:
RC-200 is sold by 1 gallon, 5-gallon buckets and also available in 55-gallon drums.
APPLICATIONS WHERE RC-200 CAN BE SUCCESSFULLY APPLIED
PAINTED CONCRETE SURFACES:
Apply with either a brush, roller or sprayer. Rust should dissipate seconds after applying. Rinse the area
immediately with water. Reapply when dry, if necessary.
SIDEWALKS AND CONCRETE DRIVEWAY:
For most effective results, mix 2 parts chemical to 1 part water in a bucket. Apply with a brush evenly
and allow to dry completely (before rising thoroughly).
STONE OR BRICK FINISHES:
On jagged unpainted surfaces, apply full strength, allow to soak for 1 to 2 minutes, rinse thoroughly.
FIBERGLASS BOATS:
To apply use a rag or sponge. Test before completing. Rinse thoroughly.
