Install the Dual Display TDS Controller to constantly monitor TDS levels of water produced by a high-output system and immediately know if the TDS levels rise above an acceptable level. The Dual Display allows you to compare both measurements with just a quick glance and adjust the calibration to your needs.
Features:
| Product Details | |
|---|---|
| Accuracy | ±2 % |
| Alarm | Steady beep for both lines |
| Features | Auto Temp Control (1 – 65°C)
Bright 5/8″ L.E.D. dual displays |
| Measurement Range | 0-999 ppm |
| Power Source | AC 110V / AC 220V |
| Probe | 1/2″ bushing, 3 meter (9.8 ft) shielded cable |
| Relay Control | The unit will open or close a circuit via dry contacts when the ppm level of the output water or input water reaches or exceeds its control setting. The PS-202 can be used to control one or two pumps, solenoid valves or other device. |
| Relay Voltage | 5V |
| Resolution | 1 ppm |
| Setting | Controlled by on-screen up/down buttons |
| Warranty & Certifications | |
| Warranty | 1 Year |
| Shipping Dimensions | |
| Shipping Length | 13 in. |
| Shipping Width | 10 in. |
| Shipping Height | 7 in. |
| Product Weight & Dimensions | |
| Approx Depth | 4.9″ |
| Product Height | 3.7″ |
| Product Width | 3.7″ |
| Product Weight (lbs) | 3.25 |
