Pulsafeeder 16-170-07 Probe Tee Kit – MicroVision Controller Accessory
Pulsafeeder 16-170-07 Probe Tee Kit – MicroVision Controller Accessory Original price was: $119.10.Current price is: $98.20.
Back to products
Stennner ST114 Line Strainer For Standard 1/4" Tube
Stennner ST114 Line Strainer For Standard 1/4" Tube Original price was: $33.93.Current price is: $27.56.
Sale New
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 1
Product Badge
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 2
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 3
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 4
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 5
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 6
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 7
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 2
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 3
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 4
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 5
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 6
Pulsafeeder LC54GA-VHC1-XXX - Pulsatron Pump Series C 30 GPD - 80 PSI - 115 VAC - Image 7
Pulsafeeder

Pulsafeeder LC54GA-VHC1-XXX – Pulsatron Pump Series C 30 GPD – 80 PSI – 115 VAC

Original price was: $762.00.Current price is: $480.00.37% OFF

The Pulsafeeder LC54GA-VHC1-XXX PULSAtron Series C metering pump is the highest-flow model in the Series C line, delivering up to 30 GPD (1.25 GPH) at 80 PSI on 115 VAC. External Pacing lets a flow meter or controller signal drive the pump, and a momentary prime button makes startup quick and easy. The VHC1 liquid end combines a PVC head, Hypalon® (CSPE) seats and O-rings, ceramic balls, and a PTFE-faced diaphragm. Because Pulsafeeder recommends a PVC wetted end for sodium hypochlorite, this model is well suited to flow-paced chlorination and bleach injection. It offers a 10:1 turndown, ±3% reproducibility, continuous-duty “hot” rating, and a water-resistant enclosure for indoor or outdoor use.

Technical Specifications

Specifications Details
Brand Pulsafeeder
Model LC54GA-VHC1-XXX
Series PULSAtron Series C
Pump Type Solenoid-driven diaphragm chemical metering pump (positive displacement)
Flow Rate Up to 30 GPD / 1.25 GPH / 4.7 LPH
Maximum Operating Pressure 80 PSI (5.6 bar)
Power Supply 115 VAC, 50/60 Hz, single phase
Control Type Manual on-line stroke length adjustment
Control Option (GA) External Pacing with momentary prime button
Max Stroke Frequency 125 SPM
Turndown Ratio 10:1
Reproducibility ±3% at maximum capacity
Pump Head / Fittings PVC
Seats / O-Rings Hypalon® (CSPE)
Check Balls Ceramic
Diaphragm PTFE-faced, CSPE-backed
Max Viscosity 1,000 cPs
Tubing Connections 1/4″ ID x 3/8″ OD
Average Current Draw 0.6 A @ 115 VAC
Average Input Power (@ max SPM) 50 W
Peak Input Power 130 W
Approvals Conforms to ANSI/NSF Std. 50
Shipping Weight 10 lbs
Mounting Wall mountable
Replacement Parts Kit (KOP) K4VHC1
Typical Applications Flow-paced chlorination, sodium hypochlorite injection, pH adjustment, corrosion inhibitor feed, indoor and outdoor water treatment
Shipping time: Estimates Lead Time: 5 - 7 Business Days
Add to wishlist
Item No: LC54GA-VHC1-XXX Category:
Description

Pulsafeeder PULSAtron Series C Chemical Metering Pump – LC54GA-VHC1-XXX

The Pulsafeeder PULSAtron Series C chemical metering pump gives you steady, high-flow chemical feed for plant and city water treatment. The LC54GA-VHC1-XXX is the largest model in the Series C line. It keeps feed rates accurate, so your system stays stable and easy to run.

This pump delivers up to 30 GPD (1.25 GPH) at 80 PSI on 115 VAC. It doses chlorine, pH adjusters, oxidizers, and rust inhibitors. The solenoid-driven diaphragm keeps output steady during long run times.

Why Choose a Pulsafeeder PULSAtron Series C Chemical Metering Pump?

Accurate, Repeatable Dosing

This Pulsafeeder PULSAtron Series C chemical metering pump uses a proven solenoid drive. You can adjust stroke length while the pump runs, with a 10:1 turndown ratio. As a result, output stays within ±3% of maximum capacity.

External Pacing with Prime Button

The GA control lets a flow meter or controller signal pace the pump. That way, chemical feed follows your system demand. The prime button also makes startup fast and simple.

Built for Nonstop Use

The pump is rated “hot” for nonstop use. The solenoid shuts off if it gets too hot and restarts on its own once it cools. The circuit is also protected against power surges. Because the housing is water resistant, the pump works well indoors and outdoors. It mounts easily on walls, feed panels, and injection skids.

Designed for Water Treatment

The LC54GA-VHC1-XXX has a VHC1 wet end: a PVC pump head, Hypalon® (CSPE) seats and O-rings, ceramic check balls, and a PTFE-faced diaphragm. Pulsafeeder recommends PVC for sodium hypochlorite. So this model is a strong choice for chlorine and bleach feed with common water treatment chemicals.

Customers use this pump for chlorine feed, cooling tower dosing, pH control, and city water treatment. We also carry matching metering pumps and water treatment equipment to build a complete dosing system.

Order Your Pulsafeeder LC54GA-VHC1-XXX Today

Need help choosing the right pump or wet end for your chemical? Our team is ready to help. Call 888-737-2782 or email sales@watertreatmentsupply.com. Or add the LC54GA-VHC1-XXX to your cart today.

Specifications

Specifications and Use Cases of Pulsafeeder PULSAtron Series C LC54GA-VHC1-XXX

The Pulsafeeder PULSAtron Series C LC54GA-VHC1-XXX chemical metering pump uses a positive displacement, solenoid-driven diaphragm design to deliver accurate, repeatable dosing at up to 30 GPD and 80 PSI. Its guided ball check valves improve priming and reduce backflow. As a result, chemical feed stays stable in continuous-duty applications. The GA control adds External Pacing with a prime button, so a flow meter or controller can match chemical feed to system demand.

The VHC1 wet end combines a PVC pump head, Hypalon® (CSPE) seats and O-rings, ceramic check balls, and a PTFE-faced diaphragm. This build offers strong chemical resistance and long service life. Pulsafeeder also recommends PVC for sodium hypochlorite, which makes this pump a reliable choice for chlorine feed in water treatment and industrial dosing.

Use Cases & Industry Applications

Flow-Paced Chlorination

Pacing from a flow meter keeps sodium hypochlorite and chlorine feed in step with water flow in municipal and industrial systems.

Water Treatment Dosing Systems

Accurate dosing of disinfectants, pH adjusters, oxidizers, and corrosion inhibitors in city and plant water systems.

Cooling Tower & Condenser Water Treatment

Controlled feed of inhibitors, dispersants, and conditioning chemicals to protect heat exchange equipment and maintain water quality.

RO / Pretreatment Chemical Dosing

Precise injection of antiscalants and pretreatment chemicals in reverse osmosis and filtration systems that need higher Series C flow rates.

Indoor / Outdoor Compact Installations (115 VAC)

The wall-mountable, water-resistant design suits compact dosing rooms, packaged systems, and remote treatment sites running on 115V power.

Datasheet

Pulsatron-series-C-data-sheet

Pulsatron-C-C-A-E-E-DC-E-HV-Manual

Pulsafeeder-Resistance-Guide

Pulsa-Catalog

 

Replacement Parts

No replacement parts listed for this item yet.

FAQs

FAQs:

  1. What is the maximum flow rate of the Pulsafeeder LC54GA-VHC1-XXX?
    It delivers up to 30 GPD (1.25 GPH) of chemical dosing output.
  2. What is the maximum pressure rating for this PULSAtron Series C pump?
    The pump is rated for a maximum operating pressure of 80 PSI.
  3. What power supply does this model use?
    This model operates on 115 VAC, 50/60 Hz, single-phase power.
  4. What materials are included in the VHC1 wet end configuration?
    The VHC1 wet end includes a PVC pump head, Hypalon® (CSPE) seats and O-rings, ceramic check balls, and a PTFE-faced diaphragm.
  5. What does the GA control option do?
    GA adds External Pacing with a momentary prime button. A flow meter or controller signal can pace the pump, and the prime button makes startup quick.
  6. Is this a diaphragm chemical dosing pump?
    Yes. It uses a positive displacement, solenoid-driven diaphragm design, which ensures accurate and repeatable chemical metering.
Reviews (0)

Customer Reviews / Ratings

There are no reviews yet.

Be the first to review “Pulsafeeder LC54GA-VHC1-XXX – Pulsatron Pump Series C 30 GPD – 80 PSI – 115 VAC”