Water Treatment Supply

Call Us For a Free Consultation!

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

R12-1200-2 Reverse Osmosis System



Standard Features in Package 1: Stainless steel frame Automatic inlet valve Pre-filter housing and cartridge, 10″ Procon pump (brass) 1/2 HP motor 2 1/2″ liquid filled pump pressure gauge Stainless steel pressure vessel(s) Needle valve for concentrate and recycle lines SS check valve for product water Product pressure switch with Auto/Off Low-pressure shut-off with automatic restart Additional

Features in Package 2: Pre-filter pressure gauges Product water flow meter Reject water flow meter

Additional Features in Package 3: Automatic fast flush for concentrate Compact, wall mounted systems. Four models for flow rates to 1200 GPD.

Options: Stainless steel leg kit Product water float switch Whole house option* *Includes 300 gal tank, product water float switch, and repressurization pump with built in controls. Notes: Maximum production are based on 77F feed water, SDI < 3, 1000 ppm TDS, and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pre-treatment may be required. Membrane rejection rates arebased on membrane manufacturer’s specifications. Pre-filter is Flow-Pro FPMB5-978 melt blown cartridge. Systems are designed for use with municipal and well water.

Model R12-1200-2
Condition New
Typical rejection 0.98
Membrane size 2-1/2″x40″
Recovery (adjustable) 25 – 75 %
Dimensions 22″x52″x12″
Feed water connection 1/2″ NPT
No. of membranes 2.0
Gpd 1200.0
Package 2.0
Wt. (lbs.) 70.0
Pump 1/2 HP
Amps 8
Electrical requirement 120 v / 60 Hz
Drain requirement (maximum) 2.4 GPM
Feed water pressure requirement (minimum) 10 PSI
Feed water requirement (maximum) 2.4 GPM
Product water & reject water connection (tubing) 3/8″