LC04SA-VHC1-XXX – Pulsatron Pump Series C 24 GPD 80 PSI 115v

PULSAtron Series C Metering Pump
24 GPD – 80 PSI, 115 VAC

Single Manual Control
Stroke length is manually adjustable, stroke frequency is fixed. 10:1 max turndown.

General Description
Pulsafeeder PULSAtron Series C chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series C guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series C pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat. Agency Approved and water resistant for demanding outdoor and indoor applications.

Drive Assembly
The pump drive is fully enclosed and without any exposed working parts. Electronics are housed inside a chemically resistant shell at the rear of the pump for the best protection against chemical leaks. The average amount of electricity used is 50 watts.

Pump Controls
Adjustment is by means of a readily accessible dial knob for changing stroke length with the stroke frequency fixed. The knob is located opposite the liquid handling end.

Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.

Pulsafeeder PULSAtron Series C Chemical Metering Pump – Key Features

• Manual Control by on-line adjustable stroke length (fixed stroke rate).
• Extremely dependable timing circuit.
• Dependable performance in metering.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Rated “hot” for continuous duty.
• Leak-free, sealless, liquid end.