Call us For a Free Consultation!

B36/MSL-PP41 HC 39″ 115v


The Lutz full model number for this electric pump set is B36 MSL-PP 41 HC 39″. It may be used with most Acids and Base or water solutions.

Comes with motor B 36 (120 V) motor, immersion depth: 39″ / 1000 mm (seal less). suitable for emptying 15 to 55 gallon drums conditionally safe to run dry.

Suitable for corrosive and neutral, aqueous to slightly viscous liquids in non-explosive areas.

Liquid examples:

  • For thin-bodied acids such as hydrochloric acid, battery acid, ferric (III) chloride, phosphoric acid, chromic acid, citric acid, Propylene Glycol, Dowfrost, Dowfrost HD, Distilled Water, Deionized Water, etc.


  • No grease fillings.
  • Optimized drum drainage.
  • Modular, service friendly design.
  • Radial-flow impeller (L) for higher delivery head.


  • Lube-free pump tube, thus no contamination of the liquid.
  • All-purpose resistant PTFE shaft bearing.
  • Two impeller geometries for a tailored pump characteristic.
  • Easy maintenance without special tools.
  • Sealless

Immersion Length: 39″ (55 gallon drum)
<br=””>Flow Rate Max.: 13.2 GPM (50 l/min)
Pumping Head Max: 31 ft. (9.5 m wc)
Viscosity Max: 600 cps (600 mPas)


  • Motor B36 with 16 ft cord
  • 39“ sealless polypropylene pump tube
  • High head impeller
  • 3/4“ polypropylene nozzle
  • 8’ PVC Hose
  • Hose Clamps
  • Wall Hanger

Power: 120 V, 0.85 HP, ODP
Maximum Viscosity: 760 CPS</br=””>

Skip to content