Contact us for consulting:

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

B36 230V/MSL-PP41 HC 47″ 230v

0205-112 LUTZ


PULSAtron Series A Plus Metering Pump
58 GPD @ 100 PSI, 115 VAC

Dual Manual Control
Stroke frequency and stroke length are manually adjustable. 100:1 max turndown.

General Description
Pulsafeeder PULSAtron Series A Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series A Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series A Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat. Agency Approved and water resistant for demanding outdoor and indoor applications.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.

Pulsafeeder PULSAtron Series A Plus Chemical Metering Pump – Key Features

  • Manual Control by on-line adjustable stroke rate and stroke length.
  • Highly Reliable timing circuit.
  • Circuit Protection against voltage and current upsets.
  • Solenoid Protection by thermal overload with auto-reset.
  • Water Resistant, for outdoor and indoor applications.
  • Internally Dampened To Reduce Noise.
  • Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
  • Few Moving Parts and Wall Mountable.
  • Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
  • Reliable metering performance.
  • Rated “hot” for continuous duty.
  • Leak-free, sealless, liquid end.

230 Volt, B36 Motor Electric Pump Set – 2 Options.

For light viscous mineral oils such as diesel, fuel oil, hydraulic oil, machinery oil, motor oil, etc.

This line of Lutz Pump Sets has 7 options:

  • Part Number 0205-111: 230 Volt B36/MSL-PP 41 HC – B36 Motor, 39″ Length Tube
  • Part Number 0205-112: 230 Volt B36/MSL-PP 41 HC – B36 Motor, 47″ Length Tube


  • No grease fillings
  • Optimized drum drainage
  • Modular, service friendly design
  • Radial-flow impeller (L) for higher delivery head


  • Lube-free pump tube, thus no contamination of the liquid
  • All-purpose resistant
  • PTFE shaft bearing
  • Easy maintenance without special tools
  • Sealing modules of the sealless pump are replaceable
Actual Weight 7.4
Bearing Housing ETFE / PTFE
Capacities (GPM) 45
Drive Shaft HC-4 (2.4610) Stainless Steel (316 Ti)
Heads To (Feet) 31
HP 0.85
Hz 60
Impeller Code Axial-Flow Rotor (R)
Impeller Material Polypropylene
Includes Motor, Pump Tube, Hose, Clamps, Wall Hanger
Maximum Operating Temperature 122 °F
Maximum Viscosity (CPS) 300/600
Motor Universal motor
Motor Enclosure Type ODP – Open Drip Proof
Motor ID B36 MI4 110V
Quick Specs B36 MSL-PP 41 R HC 47” SET
Size 47″
Spec. Gravity 1.1
Tube Housing Polypropylene
Tube Type MSL-PP
Voltage 120