$345.02
995 in stock
The CIC controllers can monitor and control dosing and/or injection systems. This unit will control 2 separate systems.
Features:
| TDS Range | 0 – 8500 ppm (CIC-152-4) |
| EC Range | 0 – 9999 µS |
| Temperature Range | 1-80°C; 33-176°F |
| Accuracy | ±2% (of the reading) |
| Resolution | 0.1 ppm (0-999); 1 ppm (1000-9999) |
| ATC | Yes (1 – 80 degrees Celsius) |
| Calibration | Digital (by push button) |
| Factory Calibration | 1413 µS |
| Conversion Factor | CIC-152-4: 442 (0.4-0.7) |
| Set Points: Adjustable by push buttons. Control Point 2 | Maximum TDS Limit. Control Point 1: Lower TDS Level. |
| Relay Control | The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1). |
| The contacts are switched back to the normal position once the TDS returns to the acceptable range | |
| Relay Voltage | 5V (attached devices must have their own power supply) |
| Alarm | Two independent alarms (set by the user) |
| Display | Bright 5/8″ L.E.D. display |
| Probe | 1/2″ bushing (NPT), 3 meters (9.8 ft) shielded cable (model SP-1-PSC) |
| Power Source | AC 110V / AC 220V |
| Dimensions | 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in.) |
| Monitor Weight | 241 g (8.5 oz) |
| Total (Shipping) Weight | 610 g (1 lb 5.5 oz) |
