HC/40-20 Harmsco Hurricane Filter 20 Micron For HUR-40HP
$125.00
Harmsco HC/40-20, 20 Micron Premium Hurricane Polyester Cartridge
– Fewer cartridges mean fewer replacements and cheaper maintenance costs.
– Pleated Polyester-Plus™ filter media improves flow rates and reduces initial pressure drop. – Pleated surface area increases loading capacity, resulting in extended filter life and enhanced particle removal.
– The end cap, center tube, and media are thermally fused as a single integral component for increased strength.
– Pleated Polyester-Plus™ filter media improves flow rates and reduces initial pressure drop. – Pleated surface area increases loading capacity, resulting in extended filter life and enhanced particle removal.
– The end cap, center tube, and media are thermally fused as a single integral component for increased strength.
– High Flow capability
– Lower overall operating cost
– Reduced waste disposal
– Longer filter runs for fewer change-outs
– Increased contaminant removal
– Operator friendly
– NSF Certified to ANSI-NSF 61
Applications
– Reverse Osmosis Pre-Filtration – Cooling Tower Filtration
– Municipal Drinking Water Filtration – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration – Food & Beverage Filtration
– Desalination Pre-Filtration – Marine/Aquatic Filtration
– Industrial Water Filtration – Industrial Coolant Filtration
– Reverse Osmosis Pre-Filtration – Cooling Tower Filtration
– Municipal Drinking Water Filtration – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration – Food & Beverage Filtration
– Desalination Pre-Filtration – Marine/Aquatic Filtration
– Industrial Water Filtration – Industrial Coolant Filtration
Cleanable/Reusable in most filtration applications and micron ratings
Micron Rating | 20 Microns |
Media (sq ft) | 40 |
Rec. Flow Rate (GPM) |
35 |
Max Flow Rate (GPM)* |
50 |
Max Flow Rate (LPM)* |
189 |
Max Flow Rate (M3/Hr)* |
12 |
Filter Dimension | 7-3/4″ OD x 9-5/8″ H |
Filter Media | Nominal pleated Polyester-Plus™ |
End Caps |
Pliable PVC w/ sealing surface built in |
Center Tubes |
ABS or PVC |
Temperature |
140°F (60°C)** |
* Harmsco Recommends operation at 70% of maximum flow rate for optimum performance
** Temperature limits vary and depend on pressure and time under load