Contact us for consulting:

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

B2 BATTERY PP32RSL 27″

0207-061 LUTZ

$784.55

999 in stock

PULSAtron Series A Plus Metering Pump
58 GPD @ 100 PSI, 115 VAC

Dual Manual Control
Stroke frequency and stroke length are manually adjustable. 100:1 max turndown.


General Description
Pulsafeeder PULSAtron Series A Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series A Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances. Series A Plus pumps continue to meet their specifications for pressure and capacity even during extended use. That’s because of our high quality solenoid and special enclosure that effectively dissipates heat. Agency Approved and water resistant for demanding outdoor and indoor applications.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.

Pulsafeeder PULSAtron Series A Plus Chemical Metering Pump – Key Features

  • Manual Control by on-line adjustable stroke rate and stroke length.
  • Highly Reliable timing circuit.
  • Circuit Protection against voltage and current upsets.
  • Solenoid Protection by thermal overload with auto-reset.
  • Water Resistant, for outdoor and indoor applications.
  • Internally Dampened To Reduce Noise.
  • Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
  • Few Moving Parts and Wall Mountable.
  • Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
  • Reliable metering performance.
  • Rated “hot” for continuous duty.
  • Leak-free, sealless, liquid end.

Pump Set Lutz B2 Vario PP-SL – Motor 180 W, 110-120V / 60 Hz
For thin-bodied fluids such as battery acid, ammonia solution, photographic developer /-fixer, glycols, phosphoric acid, hydrochloric acid and hydrogen peroxide. For filling small quantities from hobbocks, canisters and drums.

Pump Set Lutz B2 Vario SS-SL – Motor 180 W, 110-120V / 60 Hz
For thin-bodied fluids such as oil-based lubricants, cleaner solvent, plasticizer. For filling small quantities from cans and drums.

Pump Set for Acids and Base solutions – with Motor B 36 640 W/0.85 HP, 110-120V / 60 Hz or with MD-2 Air motor 400 W/0.54 HP
For thin-bodied acids and bases such as hydrochloric acid, battery acid, ferric (III) chloride, phosphoric acid, chromic acid, citric acid, sodium chloride, kalihydrate, ammonia solution, formic acid, acetic acid, etc

Pump Set for Highly Corrosive Acids and Base solutions – with motor B 55-T-5 510 W/0.68 HP, 110-120V / 60 Hz or with MD-2 Air motor 400 W/0.54 HP
For concentrated acids and bases such as chloric acid, chromic acid, sulfuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite, etc.

Pump Set for Flammables, Hazardous Locations – with motor ME I 6 Ex 640 W/0.85 HP, 120V / 60 Hz (Explosion Proof) or with MD-2 Air motor 400 W/0.54 HP (Explosion Proof)
For hazardous fluids such as acetone, conc. formic acid, ethyl acetate, butyl acetate, conc. acetic acid, nicotine, toluol, styrol, etc.

Pump Set for Thin Bodied Oils and Diesel Fuel – with motor B 36 640 W/0.85 HP, 110-120V / 60 Hz
For light viscous mineral oil products such as Diesel, fuel oil, hydraulic oil, machinery oil, motor oil, etc.

Rechargeable Pump B1 for Laboratories – Battery pump set B1
Liquid examples: For decanting thin bodied acids, alkalis and chemicals such as battery acid, glycols, phosphoric acid, hydrochloric acid, ammonia water, etc.

Drum pump Lutz B2 Vario for the Laboratory and Research sector
Liquid examples:For decanting thin bodied acids, alkalis and chemicals such as battery acid, glycols, phosphoric acid, hydrochloric acid, oil-based lubricants, cleaner solvent.