LC54SB-VVC9-XXX Pulsatron Series C Metering Pump 30 GPD – 80 PSI – 230 V

PULSAtron Series C Metering Pump with Degas Head
30 GPD – 80 PSI, 230 VAC

Single Manual Control
The stroke length is manually adjustable, the stroke frequency is fixed. 10:1 max turndown.

Overview
The Pulsafeeder PULSAtron Series C chemical metering pumps have positive displacement and a diaphragm. While the pumps are in operation, the output volume can be adjusted from zero to maximum capacity. PULSAtron Series C guided check valves, with their cutting-edge seat and ball designs, offer precision seating as well as exceptional priming and suction life. The out timing circuit is extremely dependable and, by design, is unaffected by temperature, EMI, and other electrical disturbances. Even after extended use, Series C pumps continue to meet pressure and capacity criteria. This is due to our high-quality solenoid and unique enclosure, which effectively dissipate heat. Agency Approved and water-resistant for tough outdoor and indoor applications.

The Drive Assembly
The pump drive contains no exposed working parts and is entirely enclosed. Electronics are housed in a chemically resistant housing at the back of the pump to provide the best protection from chemical leaks. The average quantity of electricity consumed is 50 watts.

Pump Controls
Adjustment is by means of a readily accessible dial knob for changing stroke length with the stroke frequency fixed. The knob is located opposite the liquid handling end.

Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.

Pulsafeeder PULSAtron Series C Chemical Metering Pump – Key Features

• Manual Control by on-line adjustable stroke length (fixed stroke rate).
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Rated “hot” for continuous duty.
• Reliable metering performance.
• Leak-free, sealless, liquid end.