Original price was: $770.91.$417.00Current price is: $417.00.
Stenner Classic Series metering pumps are self-priming, and the 3-point roller assembly provides a positive 2-point seal on the pump tube at all times. This eliminates the need for anti-siphoning valves and diaphragms. The patented mechanical feed rate control (adjustable models) allows the pump’s output to be scaled from 5% to 100% with the simple turn of the dial. Injection valve, Foot valve and Tubing included with all pumps.
| Body Material | Polycarbonate |
| Item | Chemical Metering Pump |
| Tubing Material | Santoprene |
| Chemical Metering Pump Type | Peristaltic |
| Min. Flow Rate | 4.3 gpd |
| Voltage – Pumps | 115V AC |
| Reproducibility – Pumps | +/-2.0% |
| Number of Feeds | Single Head |
| Self-Priming | Yes |
| Max. Pressure – Pumps | 25 psi |
| HP – Pumps | 1/30 hp |
| Motor RPM | 44 RPM |
| Tubing Material – Peristaltic Pumps | Santoprene |
| Standards | IAPMO Listed Conforms to Standard NSF/ANSI 61 and 372, INTERTEK/ETL Sanitation Listed Conforms to Standard NSF/ANSI 50 |
| Max. Viscosity – Pumps | 1,500 cps |
| Reproducibility | +/-2.0% |
| Flow Rate Output Control | Adjustable |
| Includes | 20 ft Roll of Suction/Discharge Tubing, Pump Tube, Duckbill Check Valve 100 psi, Mounting Bracket, Weighted Suction Line Strainer, (2) Additional Latches, (3) Connecting Nuts, (3) 1/4 in Ferrules |
| Turn Down Ratio | 20:1 |
| Max. Flow (GPD) – Pumps | 85.00 gpd |
| Phase – Pumps | 1 |
| Suction Lift | 25 ft |
| Max. Flow Rate | 85 gpd |
| Features | Adjustable Single Head, Nonclogging Design, Valveless |
| Turn Down Ratio – Pumps | 20:1 |
| Head and Fitting Material – Pumps | Polycarbonate/Polypropylene/PVC |
| Max. Flow (gpd) – Pumps | 85.00 gpd |
| Item – Chemical Metering Pumps | Chemical Metering Pump |
| Phase | Single |
| Duty Cycle | Continuous |
| Discharge Connection Type | Tube |
| Metering Reproducibility | +/-2.0% |
| Intake Connection Type | Tube |
| Media Temp. Range | 32 Degrees F to 125 Degrees F |
| Horsepower (Maximum) | 1/30 hp |
| Media Temperature (Minimum) | 32 Degrees F |
| Pressure (Maximum) | 25 psi |
| Motor Speed (Maximum) | 44 RPM |
| Motor Type | Shaded Pole |
| Roller Material | Bronze |
| Frequency | 60 Hz |
| Housing Material | Polycarbonate |
| Motor Mounting Type | Not Applicable |
| Ambient Temperature (Maximum) | 125 Degrees F |
| Control Programs | Manual Control |
| Fitting Material | Polypropylene, PVC |
| Media Temperature (Maximum) | 125 Degrees F |
| Flow Rate (Minimum) | 4.3 gpd |
| Max. Discharge Pressure | 25 psi |
| Electrical Connection Type | Plug-In |
| Head Material | Polyethylene, Polypropylene |
| Nameplate Voltage | 120V AC |
| Degassing Valve Included | No |
| Flow Rate (Maximum) | 85 gpd |
| Priming | Self-Priming |
| Viscosity (Maximum) | 1,500 cps |
